Construction Notes

I, on the deployment of wallpaper glue
1 , the purpose glue : make wallpaper can stick firmly to the wall , if there is no interior seepage or vandalism and other special circumstances, normal wallpaper after construction should not have come off and other issues.
2 , consists of wallpaper glue powder and white glue mixed , moderate viscosity , easy to wipe the brush . Wallpaper adhesive to ensure good results, often depending wallpaper , adding different amounts of white glue , generally 10% to 20 % is appropriate.
3, the addition of a reference wallpaper white plastic powder , add water about four liters , stir into the glue , add white glue paste and then stir to use.
Second, on the exterior wall treatment
1 , in principle, to achieve smooth, dry , uniform color that is suitable for wallpaper .
2 , cement, brick : itself is relatively flat , with putty and brush on a thin batch flat varnish to wallpaper .
3 , gypsum board, plywood and wood panels : Due to the presence of seams , sew it up again first batch level. Fill joints with putty : To add more white plastic ( vinyl acetate ) , so that the seam is not firmly split .
4 , gypsum powder and white glue : Replace Batch flat with putty , you can speed up the drying , shorten construction time.
5 , whitewashed wall : that there is no solid wall regalia exist , should be removed matte , leveling, wallpaper paste on the brush before the basement membrane .
6 , paint the walls : suitable change wallpaper , but after sanding and brushing should be done on paper before construction of the basement membrane .
7 , basement membrane function : a base film aimed at curing and protection putty surface , the wall can be strengthened by the end of waterproof , mildew function, but to wait for the putty completely dry before brushing .
8 , any wallpaper wall covering all non- flooded construction .
9 , before the construction of the wall to brush the base film.
Third, the proper use of the scraper and brush in short
1 , after the glue on wallpaper paste the wall, must Calibrating and expelled bubbles.
2 , Calibrating Tools a. Plastic scraper b. Broadside short brush .
3, generally higher than scratch the plastic surface washable wallpaper , it can be used a plastic scraper to gently Calibrating the surface , driven out bubbles. Scraper can not be too hard , or easy to scratch the surface discoloration caused by printing , reflective seams obvious problems .
4 , senior textile wall covering surface is easily damaged , with only a short flat brush gently brush and glue in moderation, the glue should never be driven out of the slit contaminated surfaces , or they will not be processed.
5 , paper wallpaper is very fragile , only with short brush , glue stains surfaces should be avoided , if not careful touches , immediately wipe clean. Otherwise it will not remove the glue to dry , and can cause color.
6 , when the construction of any wallpaper , wallpaper glue should not stick on the surface is the most perfect construction process .